Sony TRINITRON KV-27HS420 Service Manual page 15

KV-27HS420/29DRC430/32HS420 ECG WIRE DRESSING
Caution Points:
1. Make sure braided ECG wire loop does not
twist, and stays flat on CRT surface.
2. Do not pull excessively on the tension spring
3. If the spring appears warped or stretched,
replace entire parts. The braided ECG wire
CANNOT sag on the CRT, and must remain
under tension.
Earth Coating
Ground Wire (ECG)
32": 1-900-808-29
KV-27HS420/29DRC430/30HS420/32HS420/34HS420
(Earth Coating Ground)
NOTE: Leads are
dressed inside
Rotation Coil.
Rotation
DY
COIL
CRT BRKT
KV-27HS420/29DRC430/30HS420/32HS420/34HS420
g
NOTE2: There are
2 Leads (TOTAL 4
Wires) to connect
to CH-Board
Integral Spring
2-Places
Rev. 1
3/11/05
15