Technical Specifications - Ford FIESTA Owner's Manual

WARNINGS
Make sure there is no grease or oil on
the threads or the surface between
the wheel lugs and nuts. This can
cause the lug nuts to loosen while driving.
Do not fit run flat tires on vehicles
that were not originally fitted with
them. Contact an authorized dealer
for more details about compatibility.
WARNINGS
Do not install alloy wheels using lug
nuts designed for use with steel
wheels.
Lug nuts are subject to change. You
must make sure that you use only
the specific lug nuts and wheels
supplied with your vehicle. If in doubt
please contact your authorized dealer.
Note: The lug nuts of alloy wheels and
spoked steel wheels can also be used for
the steel spare wheel for a short time
(maximum two weeks).
Note: Make sure that the cones on the lug
nuts are against the wheel.
1. Install the wheel.
2. Install the lug nuts finger tight.

TECHNICAL SPECIFICATIONS

Wheel Lug Nut Torque
Wheel Type
Fiesta (CCN) Vehicles Built From: 21-03-2014, Vehicles Built Up To: 03-08-2014, CG3582en enGBR, Edition date: 02/2014, Second Printing
Wheels and Tires
All
3. Install the locking lug nut key.
4. Install all of the lug nuts and partially
tighten them in the sequence shown.
5. Lower your vehicle and remove the
vehicle jack.
6. Fully tighten all of the lug nuts in the
sequence shown. See Technical
Specifications (page 194).
7. Install the wheel trim.
WARNING
Have the lug nuts checked for
tightness and the tire pressure
checked as soon as possible.
lb.ft (Nm)
100 lb.ft (135 Nm)
194