Table of Contents
Advertisement
Chapter 2 ETERNUS DX Connection Settings
2.1 Common Settings
2.1.2.3
Windows®
For Windows®, perform the settings detailed in
Table 2.5
Reservation Conflict Response for Test Unit Ready setting for Windows®
Windows Server® 2012 R2
Windows Server® 2012
Windows Server® 2008 R2
Windows Server® 2008
Windows Server® 2003
When a Windows® server and ETERNUS DX are connected via a single path connection using an ETERNUS
Multipath Driver, set the host response Sense Data Conversion Pattern to [No Conversion].
If connection is performed without using an ETERNUS Multipath Driver, set the host response Sense Data
Conversion Pattern to [Windows Recommended (When not using GR/ETERNUS MPD or Device Driver)].
Table 2.6
Sense Data Conversion Pattern setting for Windows®
Windows Server® 2012 R2
Windows Server® 2012
Windows Server® 2008 R2
Windows Server® 2008
Windows Server® 2003
When connecting a Windows®-based VMware VCB Proxy server to the ETERNUS DX, and the LUNs are shared
between the VMware VCB Proxy server and VMware ESX server, the settings detailed in
(page 11)
should be used.
2.1.2.4
Linux
For Linux, perform the settings detailed in
Table 2.7
Sense Data Conversion Pattern setting for Linux
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
OS
MSCS or WSFC configuration
OS
No Conversion (Default)
Table
ETERNUS Multipath Driver
OS
(When not using GRMPD)
Copyright 2014 FUJITSU LIMITED
and
Table
2.6.
Table 2.5
Normal (Default)
Conflict
ETERNUS Multipath Driver,
ETERNUS Device Driver
Used
Not used
Windows Recommended
(When not using GR/
ETERNUS MPD or Device
Driver)
2.7.
Not used
Linux Recommended
10
All other configurations
Normal (Default)
msdsm
Windows
Recommended (When
not using GR/ETERNUS
MPD or Device Driver)
—
"2.1.2.5 VMware ESX"
P3AM-3972-08ENZ0
Advertisement
Table of Contents
