Pc Connectivity; Software Update - Nokia N800 User Manual

PC connectivity

You can connect your device to a compatible PC with the
supplied Nokia Connectivity Cable DKE-2 (USB). Use the
USB data cable to transfer files to a compatible memory
card and to update the latest software on your device.
When the USB cable is connected, the memory card of
your Nokia N800 is listed as a mass storage device on your
PC, and is displayed on your device. To be able to
transfer files from the PC to the device, you must have a
compatible memory card installed in the device.
When the USB cable is connected, you cannot access the
information on the memory card with your device.
However, you can transfer files from your PC to the
memory card, and view the contents of the memory card
on your PC.
Important: Do not remove the USB cable in the
middle of an operation when the device is being
accessed. Removing the cable in the middle of
an operation may damage the memory card as
well as the device, and data stored may be
corrupted. When you are finished with file
transfer, do not just pull the USB cable from the
PC, but follow the proper procedures to
disconnect your device from the PC. For more
information, see the user guide of your PC.

Software update

To be able to update the software on your device, you
must first install the Nokia Internet Tablet Software
Update Wizard on your compatible PC. You must also
have the USB cable and a fully charged battery for your
device.
For more information on the software update, check
www.nokia.com/n800.
Tip: To check the version number of the current
software on your device, tap
Tools > Control panel
, and select
> About product.
© 2006 Nokia. All rights reserved.
45