Using The Self Timer - Canon DC100 Instruction Manual

Using the Self Timer

* only. To change the operating mode, refer to About the Operating Modes (
MENU
MENU
" " appears.
Start/Stop
Press
The camcorder starts recording after a 10-second countdown. The countdown appears
on the screen.
Start/Stop
Press
to record the still image.
The camcorder will record the still image after a 10-second countdown. The countdown
appears on the screen.
Once the countdown has begun, you can also press
self timer. The self timer will be canceled if you turn off the camcorder.
Downloaded From VideoCamera-Manual.com Manuals
44
: Set the camcorder in record pause mode.
CAMERA SETUP
SELF TIMER
ON
:
.
:
, first halfway to activate the autofocus and then fully
Start/Stop
to cancel the
9).