Download Print this page

Specifications; Troubleshooting; Limited Warranty - Acoustic Research ARPR1212 Performance series Owner's Manual

Acoustic research arpr1212 performance series subwoofer
Hide thumbs Also See for ARPR1212 Performance series:

Advertisement

OPTION 2 - CONNECTION WITH AUDIO CABLE
I~--- ~.
p=T_-
/
PRE-AMPLIFIER
iiyouipreamp
iecewoi
pioces~oi has a cubwooferoormono
OUtpUtJaCkthaf IS
controlledby
the master volume contioi use a wig/e audio cable to connect that
output to the subwoofer
Lnie~h~pch No audio cables from the subwoofers Lme
OMJacks are needed 111 ii16 Set iip
SUBWOOFER ADJUSTMENT & USE
Subwoofer initial control settings
.
Set the LOW PASS FRFQUENCY Control to Its center posrtlon.
.
Set the LEVEL Control fully counterclockwrse to MIN. You'll reset
thus control after you rnake other adjustments
Adjusting the Subwoofer controls
.
Play a program on your system For the following adjustments, use
the Dolby ProLogrc Normal surround mode and select a movre that
has a Dolby Surround soundtrack with a lot of musrc, or play a music
CD. Adjust the Recerver's volume control for a comfortable sound
level from the system speakers.
.
Increase the Subwoofer's LEVEL Control settrng clockwise, so that
you hear the deep bass Adjust the control for a natural, musical
balance that has plenty of deep bass sound when rt IS actually
present in the musrc
.
Listen carefully to bass voices and, rf needed, adjust the LOW PASS
FREQUENCY Control so that they sound natural. Setting the
frequency too high will make deep voices sound excessively
"chesty" or resonant and will grve the upper bass rn music a "one-
note" qualrty. Setting the frequency too low WIII make deep voices
sound "thin" and WIII grve musrc a lack of "warmth".
.
Make fine adjustments untrl the program has satrsfyrng and natural
sound quality on both bass vorces and music.
Setting the Phase Switch
The PHASE swatch controls the phase of the Subwoofers output rela
trve to that of the Front speakers In many mstallattons, it WIII be drf
frcult to tell whrch swatch tettrng IS the correct one Listen carefully
to the sound quality whrle someone else toggles the swatch between
Its two positions. The positron that produces the fullest deep bass
and the warmest bass and rnrd-bass sound IS the correct one. You
rmay need to readjust the SUBWOOFER OUT LEVEL and SUBWOOFER
CROSSOVER FREQUENCY controls after setting this swatch
TROUBLESHOOTING
Subwoofer POWER Indicator LED does not light
.
Check that the SubwooferS POWER Swatch IS in the AUTO ON positron
.
If the POWER Swatch 15 III the AUTO ON positron, check the AC out
let the Subwoofer 15 plugged Into to be sure that it IS live You can
use a tester or plug-III a lamp to check it
.
If the AC outlet 15 love, either the power cord or Subwoofer has a
problem Unplug the power cord from the AC outlet and check the
fuse by unscrewrny the center piece from the holder. If rt IS blown,
replace the fuse only wth a fuse of the same type and rating. If thus
doesn't help, take the Subwoofer to your dealer for servrce - THERE
ARE NO USER SERVICEABLE PARTS INSIDE.
No sound from the Front speakers.
.
Be sure the Receiver and Subwoofer POWER Switches are in the On
positions.
.
Check the Recerver's Volume Control Setting if it IS ail the way
down, there won't be any sound
.
Check that the Receiver's Input Selector IS set to an active source of
audio signals and that a Tape Monrtor Loop IS not engaged
.
Be sure that the Receiver's Speaker Selector switch is turned on to
the terminals [A or B, lor 21 that you have your Front speakers
connected to. If the Receiver has a headphone jack, you can use
headphones to check the Receiver for output.
.
Check the wires and connections from the Receiver's Front Speaker
Output terminals to the Subwoofer's SPEAKER-IN terminals.
.
Try removing the Subwoofer from the system, leaving your Front
speakers connected to the Receiver. If there still is no sound, take
the Receiver to your dealer for service.
No sound from the Subwoofer
.
First, be sure there IS sound from the Front speakers and that the
Receiver is working correctly as outlrned above.
Check the Subwoofer's LEVEL Control. If it is all the way counter
clockwise, there may be no sound.
The Subwoofer only reproduces deep bass sound. If the program
has no deep bass, the Subwoofer will not make any sound. Play a
program wrth plenty of bass, such as jazz or rock music, or an actron
movie.
If everything else checks OK, take the Subwoofer to your dealer for
service -THERE ARE NO USER SERVICEABLE PARTS INSIDE.
SPECIFICATIONS
Drover Complement and Enclosure
12" long throw woofer in a down-frrmg slot-loaded configuration
with a 12" front firing Passive Radiator
Frequency Response
20Hr-150Hz
Amplrfrcatron
Power output: 250 Watts RMS, LFE In/Out
Total Harmonic Distortion
10% @ 250 Watts output
Signal-to-Norse Ratio
>87 dB
Crossover frequency (-3 dB)
50Hz@MIN150Hz@MAX
Special Features:
2 parrs 5 -way gold binding posts for high level output
2 parrs 5 -way gold brndrng posts for hrgh level input
2 RCA low level inputs
2 RCA low level outputs
1 RCA LFE Input
1 RCA LFE output
Frmsh Black ash laminate
Drmensrons (HxWxD). 16.75" x 14" x 18.75". (42.5cm x 35.6cm x 47.6cm)
Weight 35.5 Ibs (16.1 kgs)
LIMITED WARRANTY
Ths warranty remains in effect for five years from date of purchase for
speaker components, one year on subwoofer amplifiers and electromc com-
ponents.
TIIIS warranty protects the orrgrnal owner providing that the product has
been purchased from an authorized Acoustic Research dealer in the Unrted
States The original bill of sale must be presented whenever warranty serv-
Ice IS required. For warranty servrce outs/de the Unrted States, contact the
authorized Acoustic Research distributor in the country where the product
was purchased
Except as specrfred below, this warranty covers all defects in material and
workmanshrp. The following are not covered: Damage caused by accident,
mrsuse, abuse, product modifrcatron or neglect, damage occurring during
shipment, damage from failure to follow instructions contained in the own-
ers manual, damage resulting from the performance of repairs by someone
not authorized by Acousbc Research, or any clarms based on misrepresen-
tations by the seller. This warranty does not cover incidental or consequen-
teal damages It does not cover the cost of removrng or rernstalling the unrt.

Advertisement

loading