Table of Contents
Advertisement
Section 3 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
IP Address:
Enter the IP address of the router. The default IP
address is 192.168.0.1.
If you change the IP address, once you click Save
Settings, you will need to enter the new IP address in
your browser to get back into the configuration utility.
Subnet Mask:
Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Enable DNS Relay:
Uncheck the box to transfer the DNS server information
from your ISP to your computers. If checked, your
computers will use the router for a DNS server.
D-Link DIR-600 User Manual
Network Settings
22
Advertisement
Table of Contents
