Table of Contents
Advertisement
Connecting The Speakers
1.
Press down the terminal tab on the back of the speaker.
2.
Insert the black wire into the black terminal (–) and the red wire into
the red (+) terminal, and then release the tab.
3.
Connect the connecting plugs to the back of the product by matching
the colours of the speaker plugs to the speaker jacks.
4.
Connect the left and right surround speakers to the wireless receiver
module.
5.
Plug the power cord of the wireless receiver module in the wall outlet.
6.
Turn on the product. The product and wireless receiver module will now
communicate with each other and you will hear sound from the surround speakers.
Surround Speaker (L)
Wireless Receiver Module
This product should be connected with the SWA-5000 only.
!
CAUTION
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.
Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien substances
into the duct (hole) of the subwoofer speaker.
Do not hang the subwoofer on the wall through the duct (hole).
✎
NOTE
If you place a speaker near your TV set, screen colour may be distorted because of the magnetic fi eld generated by the
speaker. If this occurs, place the speaker away from your TV set.
Downloaded From TheatreSystem-Manual.com Manuals
Front Speaker (R)
Surround Speaker (R)
Centre Speaker
Black
Red
Front Speaker (L)
Subwoofer
1
English
Advertisement
Table of Contents
