Installing An Ac Power Module - H3C S12508-AC Installation Manual

Figure 30 Install a power module

Installing an AC power module

To install an AC power module, follow these steps:
• Installing a PEM
Installing an AC power module
•
Installing a PEM
To install a PEM:
Loosen the screws on the filler panel of the PEM slot with a Phillips screwdriver to remove the filler
1.
panel.
Insert a PEM slowly along the slide rails until it touches the backplane connector.
2.
Use the M3 screws supplied with the PEM to fix the PEM to the switch chassis, and fasten the
3.
screws with a Phillips screwdriver.
36