Remote Control Unit - Panasonic PT-L735NTU Operating Instructions Manual

Remote control unit

. / 0
Projector control panel
& ' (
#
$
%
* + , -
# RGB INPUT indicator
(page 26)
This indicator shows whether a
signal is being input to the RGB
input connectors (RGB 1 IN/RGB
2 IN). When an input signal is
detected, the indicator illuminates.
$ LAMP indicator
(page 53)
This indicator illuminates when it
is time to replace the lamp unit. It
flashes if a circuit abnormality is
detected.
% TEMP indicator
(page 52)
This indicator illuminates if an
abnormally high temperature is
detected inside the projector or
around it. If the temperature rises
above a certain level, the power
supply will be turned off
automatically and the indicator
will flash.
& Power indicator
(page 23, 25 and 26)
This indicator illuminates red when
14-E
NGLISH
)
the MAIN POWER switch is turned
on (standby mode), and illuminates
green when the power is turned on
and a picture starts to be projected.
When the WEB STANDBY is set to
"ON", the cooling fan operates and
the power indicator on the projector
flashes slowly in red.
' POWER button
(pages 23 and 25)
( Input select (VIDEO, RGB)
buttons
(page 24)
These buttons are used to select
the input signals. When AUTO
SEARCH in the OPTION menu is
set to "ON", the input signal will be
detected and selected automatically
by pressing this button for a few
seconds. (Refer to page 45.)
) AUTO SETUP button
(pages 24 and 27)
If this button is pressed while a
picture is being projected, the
projection settings will be adjusted
automatically in accordance with
'
POWER AUTO SETUP
RGB LASER
(
VIDEO MENU
1
PAGE
,
-
R-CLICK
ENTER
4
FREEZE SHUTTER
5
6
STD
FUNC1
7
Computer Projector
2
)
3
+
*
8
9