QUICK GUIDE FOR DEVICE CERTIFICATION
Press and hold
both the Temp. and
Start/Pause buttons
for 3 seconds.
Failure
If the app has not yet connected to the product, authentication is required.
For the Wi-Fi module, it takes approximately 1 minute to boot up and get ready. Therefore,until the
Wi-Fi module is ready, the Smart Control setting is not confi gured.
WF455AG-03159A_EN.indd Sec5:41
WF455AG-03159A_EN.indd Sec5:41
In your washer
Turn the Cycle Selector
until
is displayed on
the display panel and
press the Start/Pause
button after tap
"Confi rm" on the app.
Follow the
description
in the fi gure
below.
Success
In your Mobile App.
Connect through
the app so
that the app
authentication
ready screen is
displayed.
you can
connect
through the
App when only
the PS mode
is terminated
Success
Failure
washing a load of laundry _41
2012-04-13
2012-04-13
11:59:25
11:59:25