Antilock Brake; System (Abs) - Chevrolet Colorado 2012 Owner's Manual

9-44 Driving and Operating
7. Turn the engine off by turning
the key to ACC/ACCESSORY.
8. Place the transmission shift
lever in P (Park), or 1 (First) for
vehicles that have a manual
transmission.
9. Turn the ignition to LOCK/OFF.
Shifting Out of Neutral
After towing the vehicle, you will
have to shift out of N (Neutral) in
order to drive. To shift out of
N (Neutral), do the following:
1. Set the parking brake and apply
the regular brake pedal.
2. Start a vehicle with an automatic
transmission in P (Park). Use
1 (First) for vehicles with a
manual transmission.
3. Shift the transmission to
N (Neutral), or press the clutch
pedal for vehicles with a manual
transmission.
4. Press the button for the desired
transfer case shift position
(Two-Wheel High, Four-Wheel
High, or Four-Wheel Low).
5. After the transfer case has
shifted out of N (Neutral), the
indicator light will go out.
6. Release the parking brake.
7. Shift the transmission to the
desired position.
I n f o r ma t i o n P r o v i d e d b y :
Brakes

Antilock Brake

System (ABS)

This vehicle has the Antilock Brake
System (ABS), an advanced
electronic braking system that helps
prevent a braking skid.
When the engine is started and the
vehicle begins to drive away, ABS
checks itself. A momentary motor or
clicking noise might be heard while
this test is going on, and it might
even be noticed that the brake
pedal moves a little. This is normal.
If there is a problem with ABS, this
warning light stays on. See Antilock
Brake System (ABS) Warning Light
on page 5 16.