Supplied Components; Preparing The Remote Control Unit; Installing The Batteries - Sharp PN-L703B Setup Manual

If any component should be missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Remote control unit: 1
 Cable clamp: 3
 Cable clamp (insertion type): 2
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

Preparing the Remote Control Unit

Installing the batteries

1. Press the cover gently and slide it in the direction of the
arrow.
2. See the instructions in the compartment and put in the
supplied batteries (R-6 ("AA" size) x 2) with their plus (+)
and minus (-) sides oriented correctly.
3. Close the cover.

Supplied Components

 Power cord: 1
 Remote control unit battery
(R-6 ("AA" size)): 2
 CD-ROM (Utility Disk): 1
 CD-ROM (Touch Display Link): 1
 Setup Manual (this manual): 1
 Touch pen: 1
 Pen tip (for touch pen): 2
 Tray: 1
 USB cable: 1
 Eraser: 1
 Camera mount: 1
 Camera screw (inch thread): 1
 Tray mounting screws (M3) : 5
 Cover SHARP logo: 1
Place this sticker onto the SHARP logo to cover
the logo.
5
E