Advertisement
Intl Wolf Conv MW with Grill UCG:Intl Wolf Conv MW with Grill UCG
W O L F C O N V E C T I O N M I C R O W A V E
S E T T I N G T H E
There are two setting modes: 12 hour clock
and 24 hour clock.
1)
To set the 12 hour clock, press the CLOCK
SETTING button once.
x1
2)
To set the 24 hour clock, press the CLOCK
SETTING button twice.
x2
E X A M P L E
To set the 24 hour clock to 23:35.
1)
Choose the 24 hour clock by pressing the
CLOCK SETTING button twice.
x2
2)
Set the hours. Rotate the TIMER/WEIGHT
knob clockwise until the correct hour is
displayed (23).
3)
Change from hours to minutes by pressing
the CLOCK SETTING button once.
x1
4)
Set the minutes (35).
O P E R AT I O N
C LO C K
12/8/08
1:19 PM
Page 23
5)
Press the CLOCK SETTING button to start
the clock.
x1
6)
Check the display.
NOTES:
You can rotate the TIMER/WEIGHT knob
clockwise or counterclockwise.
Press the STOP button if you make a
mistake during programming.
If the oven is in cooking mode and you
wish to know the time of day, touch the
CLOCK SETTING button. As long as your
finger is touching the button, the time of
day will be displayed.
If the electrical power supply to your
microwave oven is interrupted, plug in the
oven again, then open and close the door.
The display will show "ENERGY SAVE
MODE TO GO OUT OF ENERGY SAVE
MODE SET CLOCK". This information will
appear if you have already set the language
with the LANGUAGE button. If this occurs
during cooking, the programme will be
erased. The time of day will also be erased.
When you want to reset the time of day,
follow the above example again.
If you do not set the clock, press the STOP
button once.
will appear on the
display. When the operation of the oven is
finished,
will reappear on the
display instead of the time of day.
If you set the clock, energy save mode does
not work.
23
Advertisement
