Screw Down Crown; Security Lock Button Operation - Seiko CAL. 7T92 User Manual

SCREW DOWN CROWN

• Your watch has a screw down crown to prevent accidental operation and help
maintain water-resistant quality.
• To use the crown, it is necessary to unlock the crown first before pulling it out, and
it is important to securely screw the crown in after each use.
HOW TO OPERATE THE SCREW DOWN CROWN
The crown must be securely locked in the case except when you use it to set the watch.
<How to unlock the crown>
Turn the crown counterclockwise to unscrew it.
The crown is released and projected outward
from its original position.
<How to lock the crown>
Turn the crown clockwise while pressing it to the
case until it is screwed all the way in and locked.
1. Before diving, make sure that the crown is locked tightly in place.
2. Do not operate the crown when the watch is wet or in water.
3. When screwing the crown in, ensure that the crown is correctly aligned and turn it gently.
If it is hard to turn, unscrew it first, and then rewind it. Do not screw it in by force as it may
damage the thread of the screw or the case.
20
The crown is unlocked
and can be pulled out.
The crown is locked.

SECURITY LOCK BUTTON OPERATION

SECURITY LOCK OF PUSH-BUTTONS A & B
Unlocking the push-buttons
- Turn Security Lock Buttons counterclockwise until you no longer feel the threads turning.
- The buttons can be pushed in.
Locking the push-buttons
- Turn Security Lock Buttons clockwise until you no longer feel the threads turning.
- The buttons cannot be pushed in.
1. Before diving, make sure that both buttons are locked tightly in place.
2. Do not operate the buttons when the watch is wet or in water.
Locking
A
Unlocking
6
Locking
B
Unlocking
21