Control Settings; Welcome Logo - Philips xxHFL5xx9 series User Manual

(low energy).
Smart power
Enable or disable energy saving mode.
Wake on LAN
Switch on the TV via internet if the TV is in standby.
Welcome message
Create and display a welcome message for your guests.
Display message
Switch the welcome message [On] or [Off].
Line 1
Enter the first line of welcome text.
Line 2
Enter the second line of welcome text.
Clear
Clear the welcome message.
Message Time-out
Set how long to display the welcome message.

Welcome logo

Display logo
Enable or disable the welcome logo that appears when the TV
starts.
USB to TV
Load the welcome message from USB to TV.
SmartInfo Settings
SmartInfo
This sets the way the SmartInfo is shown.
USB to TV
Load the information for SmartInfo from USB to TV.

Control settings

Local KB lock
Select On to lock all TV buttons except . Select [Off] or [All] to
unlock or lock all buttons respectively.
RC lock
Select On to disable all buttons on the remote control. Note
that you can still enter the professional setup menu by pressing
3, 1, 9, 7, 5, 3, .
OSD display
Enable or disable on-screen information.
High security
Select On to restrict access to the professional setup menu.
Auto scart
Enable or disable the auto SCART feature – this feature allows a
connected SCART device to turn the TV on or off.
USB break-in
Enable or disable access to various USB features.
Enable USB
Enable or disable access to a connected USB storage device.
SXP BaudRate
Select a baud rate value (38400 or 19200).
Enable teletext
Enable or disable access to Teletext.
Enable MHEG
Enable or disable access to MHEG channels. Applicable to UK
only.
Enable EPG
Enable or disable access to the Electronic Programme Guide.
Enable subtitle
Enable or disable subtitles.
Enable subtitle
Enable or disable subtitles.
Subtitle On Startup
Enable or disable subtitles when the TV starts.
Blue mute
Turn the TV screen to blue and mute the sound if there is no
signal detected.
Enable CI slot
19