Audio Cd/Dvd And Mp3 Mode - Mercedes-Benz COMAND control panel Operating Instructions Manual

The DVD changer loads the disc into the
selected magazine tray. The
disc <x> message appears.
i
It may take some time for the disc to be
loaded, depending on the type of disc. If no
disc is inserted for approximately 20
seconds, the display returns to the
magazine menu.
The DVD changer plays the disc if:
it has been inserted correctly.
R
it is a permissible type of disc.
R
Full magazine tray (eject function is
:
available)
Empty magazine tray (disc can be
;
inserted)
To exit the menu: press the V eject/
X
load button again or press the % back
button.
or
Select Back by sliding VÆ and turning
X
cVd the COMAND controller and press
W to confirm.
To fill empty magazine trays: press the
X
V load/eject button.
The magazine menu appears.
Select Fill Empty
X
You see the Please Wait...
COMAND switches to the next empty
magazine tray. You then see the
Insert Disc <x>.
i
Never insert a data medium before
COMAND prompts you to do so. Never
Loading
Slots.
message.
Please
message.

Audio CD/DVD and MP3 mode

insert more than one disc into a magazine
tray at a time.
Insert a disc into the disc slot with the
X
printed side facing upwards.
You see the Please Wait...
Once the disc is loaded, the DVD changer
switches to the next empty tray. You see
the Please Insert Disc <x>
Repeat this step until all trays are loaded.
X
The DVD changer will play the last disc
loaded if it has been inserted correctly and
is of a permissible type. This applies even
if not all trays have been loaded with a disc.
To cancel loading: press the V eject/
X
load button again or press the % back
button.
i
If you cancel loading with the % back
button, the system loads and plays the last
CD you inserted.
Ejecting discs from the DVD changer
If you remove one disc while playing another
disc, the DVD changer interrupts playback.
Playback continues once the disc has been
ejected.
To eject a CD/DVD: press the V load/
X
eject button.
The magazine menu appears. The magazine
tray with the current disc is highlighted.
Eject possible
:
Disc type
;
Disc name (only if stored on the disc)
=
Current disc
?
155
message.
message.
Z