Table of Contents
Advertisement
Debugging
USB Debugging
When enabled, allows debugging when the device is attached
to a PC by a USB cable.
Note: This setting is used for development purposes.
1. From the Home screen, tap
Developer options.
2. Tap USB debugging to enable or disable the setting.
When enabled, a check mark appears in the check box.
Allow Mock Locations
This setting is used by developers when developing
location-based applications.
Note: This setting is used for development purposes.
1. From the Home screen, tap
Developer options.
2. Tap Allow mock locations to enable or disable the
setting.
When enabled, a check mark appears in the check box.
138
➔ Settings ➔
➔ Settings ➔
Select debug app
Set a debugging application.
1. From the Home screen, tap
Developer options.
2. Tap Select debug app and choose an app.
Wait for debugger
Debugged application waits for debugger to attach before
executing.
Note: This setting is used for development purposes.
1. From the Home screen, tap
Developer options.
2. Tap Wait for debugger to enable or disable the setting.
When enabled, a check mark appears in the check box.
Input
• Show touches: Display visual feedback for touch interactions
on the screen.
• Show pointer location: Highlights the data that was touched
on the screen.
Drawing
• Show layout boundaries: Display clip bounds, margins, etc.
➔ Settings ➔
➔ Settings ➔
Advertisement
Table of Contents
