Planet WNAP-1260 User Manual page 82

 IP Address:
 IP Subnet Mask:
 Gateway IP
Address:
 Primary DNS:
 Secondary DNS:
 MTU Size:
 Router MAC
Address:
After finishing settings, click Apply to save the settings.
(3) PPPoE
If the ISP provides the user name and password for PPPoE (Point-to-Point Protocol over Ethernet)
dialup, select PPPoE.
Enter the WAN IP address provided by the ISP. The parameter must
be entered
Enter the WAN subnet mask provided by the ISP. It varies with the
network type. It is usually 255.255.255.0 (Class C)
Enter the IP address of the gateway provided by the ISP. It is the IP
address used for connecting to the ISP.
Enter the IP address of the primary DNS server if necessary
Enter the IP address of that DNS server if the ISP provides another
DNS server
Set the maximum transmission unit. The default value is
recommended
See descriptions on setting Router MAC Address for DHCP.
Figure 8-9
-74-
User's Manual of WNAP-1260