Upgrade; What's New - Honeywell Internet Connection Module Setup Manual

Technical Support Setup - Guide
The Save to flash button will save the new files to flash memory, and decompress
new style or devices files.
Any files that you upload to the ICM will be available on the ICM web server. To
access a file from a web browser, enter the IP address of the file, followed by /web/
and the filename. For example, to view the log on the ICM shown above, type
http://10.0.0.44/web/log into the web browser.

Upgrade

The Upgrade page will allow you to select any node on the network, and upgrade the
firmware. Firmware upgrades will be available periodically to enable new features,
add functionality, or correct problems with the original firmware. Click the link
marked "Latest Version Info" to find out if there is a new version of firmware
available.
To upgrade a specific ICM, select the node you want to upgrade from the list. Click
the Auto Update button to retrieve the latest version of firmware from the server on
the Internet. This requires the ICM to be attached to the Internet. The update process
can take several minutes depending on the network connection speed. The firmware
image is typically larger than 1 megabyte.
Figure 10 - Upgrade

What's New

The What's New link redirects to a page on the internet that contains information
about firmware updates, new products and new features. The new information is
located on the Internet, so an Internet connection is required.
- Page 18 of 18 -