Personalisation; Setting The Temperature; Setting The Drying Cycle; Functions - Hotpoint Aquarius WDL 756 P/G/A/K Instructions For Use Manual

Personalisation

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).
The temperature may be lowered, or even set to a cold wash ( ).
The Washer-dryer will automatically prevent you from selecting a temperature which is higher than the maximum value set for
each wash cycle.

Setting the drying cycle

Turn the DRYING knob to set the desired drying type.
Two options are available:
A - Based on time: from 40 to 180 minutes.
B - Based on the how damp the clothes are once they
have been dried:
Iron : slightly damp clothes, easy to iron.
Hanger : dry clothes to put away.
Cupboard : very dry clothes, recommended for towel-
ling and bathrobes.
If your laundry load to be washed and dried is much gre-
ater than the maximum stated load (see adjacent table),
perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the
drum. At this point, follow the instructions provided for a "Drying only" cycle. Repeat this procedure for the remainder of the
load.
N.B: when the drying is complete there is a cooling period, even though the DRYING knob is in the
Drying only
Turn the WASH CYCLE knob to one of the drying settings (11-12-13) according to the type of fabric, then select the desired
drying duration using the DRYING button.

Functions

The various wash functions available with this Washer-dryer will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the
selected wash cycle.
Super Wash
Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this
function offers a high-performance wash.
!
This function may not be used in conjunction with wash cycles 5, 8, 9, 10, 11, 12, 13, B, C.
Extra rinse
By selecting this function, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
!
This function may not be used in conjunction with wash cycles 8, 11, 12, 13, B, C.
Reduced Creases
By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of
the cycle the washing machine will perform slow rotations of the drum; the REDUCED CREASES and START/PAUSE indi-
cator lights will flash (orange) and the
button or the REDUCED CREASES button.
For the Silk wash cycle, the machine will end the cycle while the laundry is soaking, the REDUCED CREASES and START/
PAUSE indicator lights will flash (orange) and the RINSE phase will remain lit in a fixed manner. To drain the water so that the
laundry may be removed, press the START/PAUSE button or the REDUCED CREASES button.
!
This function may not be used in conjunction with wash cycles 8, 9, 11, 12, 13, A, B, C.
Slow Spin
By selecting this function, reduces the spin speed.
!
This function may not be used in conjunction with wash cycles 8, 10, 11, 12, 13, C.
Table of Drying times
Fabric
Load type
type
Clothing of diffe-
Cotton rent sizes, Terry
towels
Synthe-
Sheets, Shirts, Py-
jamas, socks, etc.
tics
Knitwear, Pullo-
Wool
vers. etc.
phase will remain lit in a fixed manner. To end the cycle, press the START/PAUSE
(guideline values)
Max. Cupboard Henger
load (kg) dry dry
5 180
3 140
1.5 150
position.
GB
Iron
dry
170 140
120 100
140 120
11