Samsung 460 Installation Manual page 9

Setting the Hotel Option Data
¦
To Enter this menu: Press the
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
Menu Item
Hospitality Hospitality
Mode
Mode
SI Vendor SI Vendor
Power On
Channel EN
Power On
Channel
Channel Type
Power On
Volume EN
Power On
Volume
Power On
Min Volume
Max Volume
Panel Button
Lock
Power On
Source
Power On
Option
Channel
Setup
Channel
Editor
Channel
Channel
Bank Editor
Dynamic SI
Picture Menu
Lock
Menu OSD
Menu Display
→ → → → ENTERE buttons in order.
MUTE 1 1 9
initial Value
Select Hospitality mode.
Standalone
y Stand-alone mode : TV works alone, without an SI STB or SBB.
Samsung
y Stand-alone mode : OFF / Smoovie
Set the default values that will be applied when the TV is turned on.
y User Defined : Lets you set Power On Channel and Channel Type manually. See Power
Last Saved
On Channel and Channel Type below.
y Last Saved : If you select this item, when the TV is turned on, it displays the channel it
was displaying when it was turned off.
3
When the TV is turned on, it switches automatically to this channel.
y Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog cable
...
band), CDTV (digital cable band).
y User Defined : Lets you set the Power On Volume manually. See Power On Volume
below.
Last Saved
y Last Saved : When the TV is turned on, it returns to the volume that had been set when
the power had been turned off.
...
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
0
The minimum Volume Level the user can set in Stand Alone Hospitality mode.
100
The maximum Volume Level the user in Stand Alone Hospitality mode.
Turning the front panel (local key) operations on/off.
y Unlock : Unlocks all panel keys.
Unlock
y Lock : Locks all panel keys.
y Power : Locks all panel buttons except Power.
y Menu/Source : Locks the Menu and Source.
TV
Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
y LAST OPT : Returns to its last Power state. If it was in Stand-by, it returns to Stand-by.
Last Option
If it was on, it turns on.
y Power On : When the power returns, the TV turns on.
y Standby : When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu functions on the
user Channel menu such as Auto Program, Antenna selection, etc.
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
y Change the channel numbers and names, and sort the channels in your desired
channel number order.
y Apply the video mute to channels you select. The video mute blanks out the video from
a channel and outputs only the sound while displaying a speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily, without
your having to display each channel directly.
If you set Hospitality Mode to Standalone and SI Vendor to Smoovie, this item is
displayed. Lets you edit the channel bank that works with the Smoovie Remote. Refer
to page 32.
y On : Check the DTV Program channel number. (If Dynamic SI is On, it is not availale to
edit DTV channels in Channel Editor.)
ON
y Off : Does not check the DTV Program channel number. (If Dynamic SI is Off, it is
available to edit DTV channels in Channel Editor,but additional DTV channel program
number update is not supported.)
OFF
Enable or disable the Picture Menu.
y On : The Main Menu is displayed.
ON
y Off : The Main Menu is not displayed.
Description
9
English