Buffalo AirStation Pro WAPS-APG600H User Manual page 37

SSID1 - SSID5
Auto Channel
Auto Channel Range
Channel
Auto Channel Interval
Channel Bandwidth
BSS Basic Rate Set
Enter the SSID and select the VLAN mode. Enter the VLAN ID, and if
"Multiple" is selected as the VLAN mode, enter the additional VLAN ID. A
roaming environment can be built by installing multiple AirStations with
the same SSID over a wide area.
1 to 32 single-byte alphanumeric characters and single-byte symbols can
be entered. It is case-sensitive. The VLAN ID and the additional VLAN ID
can be set to an integer value from 0 to 4094.
Note: To set SSID2 to SSID5, enable the numbers corresponding to
"Enable SSID#".
Select whether to enable or disable auto-channel. When enabled, vacant
channels can be automatically detected.
Specify the channel range used in the 2.4 GHz or 5 GHz band wireless
LAN.
Specify the channel used in the 2.4 GHz or 5 GHz band wireless LAN.
If there are any wireless devices using a nearby frequency in the
surrounding area, communication can be adversely affected. If the
communication speed is slow, try changing the channel.
Note: If W53 (52, 56, 60, or 64 ch) or W56 (100, 104, 108, 112, 116, 120,
124, 128, 132, 136, or 140 ch) is selected, DFS (dynamic frequency
selection) is automatically enabled to prevent crosstalk with weather
and flight control radar and similar equipment. When enabled, if the
AirStation detects crosstalk, wireless communication may be temporarily
stopped for about 1 minute to prevent interference with radar.
Specify the interval for changing the channel when auto-channel
is enabled. When "Change channel even if clients are connected" is
checked, the channel is changed even if the client is connected to the
AirStation.
Specify the channel bandwidth.
Select the communication speed of the management and control
communication frame for the AirStation and wireless device.
The following speeds are available in the 802.11g standards:
• 1, 2 Mbps
• 1, 2, 5.5, 11 Mbps (selected by default)
• 1, 2, 5.5, 6, 11, 12, 24 Mbps
all (1, 2, 5.5, 11, 12, 18, 24, 36, 48, 54 Mbps)The following speeds are
available in the 802.11a standards:
• 6, 12, 24 Mbps (selected by default)
all (6, 9, 12, 18, 24, 36, 48, 54 Mbps)If communication cannot be
performed when set to "all", return to the default setting.
37