Live View Tool Bar - EverFocus NVR8008X User Manual

NVR8008X Enterprise Rack Mount NVR
3.2.2

Live View Tool Bar

You can use the Live View Tool Bar to control the main / sub streams, local recording, audio,
snapshot and playback of the IP camera. On the Live View Window, click the Option button, the Live
View Tool Bar appears on the top of the live view cell.
No. Name
1 Stream Type
2 Record
3 Audio (Speaker)
4 Snapshot
5 Microphone
6 Quick Playback
7 Close
Description
Click to switch between main and sub stream.
Click to start / stop local recording. You have to set up the recording
path for the recordings in advance (see 3.3.1 Setting up the
Recording Path).
Click to transfer the sound from the device to the client side (remote
client PC) if the speakers have been connected to the device. Note
that a (built-in) amplifier and external power supply are required for
the speakers.
Click to take a snapshot. You have to set up the recording path for
the snapshots in advance (see 3.3.1 Setting up the Recording Path).
Click to transfer the sound from the client side (remote client PC) to
the device if the microphones have been connected to the client
side. Note that a (built-in) amplifier and external power supply are
required for the microphones.
Click to display the Quick Playback Bar for playing back (see 3.4
Quick Playback).
Click to disconnect the stream.
18