Panasonic DMP-BD50 Operating Instructions Manual page 33

Card
The capacity of the SD card
decreased.
MPEG-2 motion pictures and
music on an SD card cannot be
played.
The contents of the card
cannot be read.
Network
I can't connect to the network.
While using my PC, I cannot
connect to the network.
Other difficulties with playback
Audio and video momentarily
pause.
BD-Video or DVD-Video is not
played.
Picture-in-picture is not played
with BD-Video.
The virtual package is not
played with BD-Video.
Alternative soundtrack and
subtitles cannot be selected.
No subtitles.
The subtitles overlap closed
captions recorded on discs.
Angle cannot be changed.
The resume play function does
not work.
When other Panasonic products respond to this remote control
Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close
together.
Press [SETUP].
Press [, ] to select "Others" and press [OK].
Press [, ] to select "Remote Control Code"
and press [OK].
Press [, ] to select the code (1, 2, or 3) and
press [OK].
To change the code on the remote control
While pressing [OK], press and hold the
numbered button ([1], [2] or [3]) for more than
5 seconds.
Press [OK].
pWhen a BD-Video that supports the virtual package is used, and an SD card is in the slot,
data may be written to the SD card. Erase the data by using "BD-Video Data Erase", format
the card or use a new card.
pData that can be played from an SD card are AVCHD and JPEG data.
pThe card is not compatible or the contents on the card may be damaged.
pTurn off and then turn on the unit again.
pHas the LAN cable come unplugged? Check that the LAN cable is properly connected.
pHave you plugged in a modular cable for use with a telephone into the LAN terminal on this
unit? Connect with a straight LAN cable.
pIs the power for the modem or broadband router turned on? Turn the power on for each
device.
pIs there a mistake in the network settings? Follow any instructions you may have received
from your ISP (Internet Service Provider) and make changes to the settings.
pAre the broadband router settings correct? Read the operating instructions for the broadband
router.
pIs the broadband router and/or modem correctly connected? Check the operating
instructions for each device and connect accordingly.
pCheck the "Network" and "BD-Live Internet Access" settings.
pDoes your Internet Service Provider (ISP) or service contract prevent multiple terminals
connecting at the same time? Check the content of your contract.
pThis occurs between playlist chapters or scenes ([AVCHD]).
pWhen playing a title recorded on both layers, the unit automatically switches between layers
and plays the title in the same way as a normal program. However, video and audio may
momentarily cut out when the unit is switching layers.
pEnsure the disc is for the correct BD-Video region code or DVD-Video region number, and is
not defective.
pYou have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.
pSome BD-Video can only be output with HDMI.
pConfirm whether the disc supports picture-in-picture.
pConfirm whether the disc supports the virtual package.
pThe inserted SD card does not have sufficient available capacity.
pThe SD card is write-protected.
pSub contents copied to an SD card are provided by the disc producer as a part of the
BD-Video content. Even if you record images and audio onto an SD card, it cannot be played
as a virtual package.
pThe languages are not recorded on the disc.
pYou may not be able to use the on-screen menu to change the soundtrack and subtitles on
some discs. Use the disc's menus to make changes.
pSubtitles are not recorded on the disc.
pTurn the subtitles on. Set "Subtitle" on the on-screen menu to "On".
pWhen progressive output is on, closed captions cannot be displayed.
pTurn off the subtitles or turn off the closed caption setting on the TV.
pAngles can only be changed during scenes where different angles are recorded.
pMemorized positions are canceled when
– pressing [w] several times.
– opening the disc tray.
pThe resume play function may not work depending on the disc.
p[BD-V]: On BD-Video discs including BD-J, the resume play function does not work.
NOTE
Remote Control Code
Set Code 1
Set Code 2
Set Code 3
Press [ n ] and [OK] together
for more than 5 seconds on
the remote.
Page
16
5
5
—
9
9
—
—
—
—
26, 28
—
—
—
Cover
26
—
—
16
—
5
16
—
14
—
24
—
24
—
—
—
—
When the following indicator
appears on the unit's display and
you are unable to operate the unit
The unit's remote control code
Press and hold [OK] and the
indicated number button at the same
time for more than 5 seconds.
RQT9184
(ENG)
33