Sony HT-SF2300 Operating Instructions Manual page 16

Installing the speakers on the
wall
You can install your speakers on the wall.
1
Prepare screws (not supplied)
that are suitable for the hook on
the back of each speaker. See
the illustrations below.
more than 25 mm (1 inch)
Hook on the back of the speaker
2
Fasten the screws to the wall.
The screws should protrude
5 to 7 mm (7/32 to 9/32 inch).
(7/32 to 9/32 inch)
16
GB
Downloaded From TheatreSystem-Manual.com Manuals
4 mm (3/16 inch)
4.6 mm
(3/16 inch)
10 mm
(13/32 inch)
5 to 7 mm
3
Hang the speakers on the
screws.
Example of installing the speakers on
the wall
Hook on the back of the speaker
Notes
• Use screws that are suitable for the wall material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
• Contact a screw shop or installer regarding the
wall material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
• For HT-SF2300, if you install the speakers on the
wall, you do not need to attach the supplied
speaker stand.
4.6 mm
(3/16 inch)
10 mm
(13/32 inch)