PIAGGIO 633929(IT) Service Station Manual page 49

MP3 125
Maintenance
Align the drive with the reference on the crankcase
cover.
Place the flywheel in the TDC position and align
the references as shown in the figure.
Check the correct fitting of the 2 reference dowels
and fit the engine cover.
Be careful to properly fit the flywheel connector to
the relative supplements.
Secure the rotor cover by using a new gasket with
the 4 screws.
Connect the flywheel connector and the valve con-
trol vacuum-operated pipe.
Fit the coupling to the valve and position it as
shown in the figure.
Lock the upper clamp.
Fix the metal tube to the head using the gasket and
the 2 screws.
Lock the lower clamp connecting manifold / pipe.
Locking torques (N*m)
Stator assembly screws (°) 3 ÷ 4
MAIN - 15