Panasonic Diga DMR-EX79 Operating Instructions Manual page 78

Table of Contents

Advertisement

Troubleshooting guide
Music
Tracks could not be copied to the HDD.
If there are copyright protected tracks such as SCMS
restrictions, they will not be copied.
Recording from CDs that do not conform to CD-DA
specifications (copy control CDs, etc.) cannot be guaranteed.
Bonus tracks may not be copied.
ID3 tag of a MP3 file or WMA tag of a WMA file is
not completely displayed.
Only the track name ([HDD] [USB]) and artist name ([HDD]) can
be displayed with this unit.
Still pictures
Cannot display DIRECT NAVIGATOR screen.
This screen cannot be displayed during recording or copying.
Still pictures (JPEG) do not playback normally.
The images that were edited on the PC, such as Progressive
JPEG etc., may not playback. (
USB
The contents of the USB memory cannot be read.
Remove the USB memory from the USB port and then insert
again. If this does not solve the problem, turn off and turn on the
unit again.
Check that the USB memory is inserted correctly. (
The format of the USB memory or of its contents is not
compatible with the unit. (The contents on the USB memory
may be damaged.) (
The USB memory contains a folder structure and/or file
extensions that are not compatible with this unit. (
Turn off and then turn on the unit again.
USB memories connected using a USB extension cable or a
USB hub may not be recognized by this unit.
Some USB memories cannot be used with this unit. (
If inserted during playback, recording or copying etc., the USB
memory may not be recognized by this unit.
RQT9306
Downloaded From Disc-Player.com Panasonic Manuals
78
12)
13)
11, 12)
12)
11)
TV Guide
The TV Guide System does not receive any data.
Check whether the clock is properly set. (
If signal quality is bad (ghost images or limited reception), the
TV Guide system may not be able to receive any data.
"No Data" is displayed for some or all stations.
Some stations are not supported by the TV Guide system.
Analogue broadcasts are not supported by the TV Guide
system.
Programme the Timer recording manually or via G-
(
23)
The TV Guide information is not displayed
properly.
There was a programme change.
Check the current programme, e.g. on the Web site for the TV
Guide system provider or station provider.
Programme information about analogue broadcasts is not
displayed.
The TV Guide data transfer was interrupted.
The TV Guide system shows the data that was received up to
the interruption.
The programme information may be incomplete.
The TV Guide data is not updated.
Make sure that the time is set correctly.
Check whether "Off" is set under "TV Guide Download in
Standby" and change the setting in the Setup menu. (
64)
.
CODE
64)

Advertisement

Table of Contents
loading

Table of Contents