Useful Advice; Maintenance And Cleaning; Technical Data - Black & Decker FX400 User Manual

ENGLISH
Warning! The grinder should NOT be used for
wet grinding of hard food materials like pulses,
beans, grains etc. This will lead to damage of
blades and reduction of motor life span.
Recommendations when
mincing (FX400BMG Only)
Function Types of food
Mincing Meat cubes of
dimension 2x2cm
Mincing Pulses soaked for
at least 8 hrs
Mincing Chutney - Vegetables
and ground spices
with water
Note: The mincer should not be continuously
run for longer than 40 seconds.
Warning: Pulse mode should not be operated
more than 10 sec at a time.
Warning: Max capacity of Grinder mill is 50g
and mincer mill is 150g

Useful advice

• Place the appliance on a clean, flat work
surface.
• Connect the appliance to a suitable electrical
supply. Rotate the control knob (J) to the
required speed.
• When blending is complete return the control
knob to the off (0) position.
• Once the blade (F) has come to a complete
stop, lift the jug (C) from the blender body (I).
• Remove the lid (B) and pour the ingredients
into a suitable container.
Note: Ingredients can be added by inserting
them through the hole left when the filler cap (A)
is removed.
8
Warning! Never operate the Blender without the
lid (B) fitted.
Warning! Never operate the Food processor
without the lid (Y) fitted.
Warning! Never operate the mincer without lid
(K) fitted
Maintenance & cleaning
Speed Time
• Switch the appliance off, remove the plug
Pulse or 1 10-20 sec
Pulse 30 sec
• The appliance is easier to clean if you do so
1 20 sec
• Do not use abrasive cleaning agents,
• All detachable parts are dishwasher-safe.
• Place the detachable plastic parts on the top
• All removable parts can be cleaned with a
• Remove the dirty parts from the motor unit.
• Never immerse the motor unit in water nor

Technical data

Voltage
Supply
Power
Weight
from the wall socket and wait until the blade
has stopped rotating.
immediately after use.
scourers, acetone, alcohol etc. to clean the
appliance.
tray of the dishwasher. Make sure they are
placed well away from the heating element.
cleaning brush in warm water with some
washing-up liquid and rinse them under the
tap.
Clean the motor unit with a damp cloth.
rinse it under the tap.
220 – 240 Volts
50/60 Hz
400W
2.8kg