Configuration - D-Link DAP-2690 AirPremier N User Manual

Section 3 - Configuration

Configuration

To configure the DAP-2690, use a computer that is connected to the DAP-2690 with an Ethernet cable.
Step 1 - Disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel > Internet Options >
Connections > LAN Settings and uncheck the enable box.
Step 2 - Open your web browser.
Step 3 - Type the IP address of the DAP-2690 in the address field (http://192.168.0.50) and press Enter. Make sure that the IP addresses of the
DAP-2690 and your computer are in the same subnet.
Note: If you have changed the default IP address assigned to the DAP-2690, make sure to
enter the correct IP address.
Step 4 - Enter admin for the User Name and then click Login. By default the password is blank.
Note: If you have changed the password, make
sure to enter the correct password.
D-Link DAP-2690 User Manual 13