Essentials; Battery; Battery Installation - Motorola EWP1000 Series User Manual

essentials

battery

battery installation

1 Press the battery door release.
2 Slide and remove the battery door.
Note: Use this opportunity to place the ID label of your
smartphone inside the window of the battery door (see
"owner information" on page 85).
3 Insert the battery into the battery compartment and
press down to secure it.
Note: When installing the battery inside the EWP2000
series, make sure that the battery removal strip is routed
under the battery and the edge of the strip remains out
of the compartment.
4 Place back the battery door and slide to lock.
1
2
3
4
ID Label
Battery removal strip
(EWP2000 series only)
essentials 21