Pal/Ntsc Selector; Cleaning Mode - Sony ILCA-77M2 How To Use Manual

You can set time intervals to automatically switch to power save mode. To return to shooting mode,
perform an operation such as pressing the shutter button halfway down.
1. MENU → (Setup) → [Pwr Save Start Time] → desired setting.
Menu item details
30 Min/5 Min/2 Min/1 Min (default setting)/10 Sec
Note
Turn off the product when you do not use it for a long time.
The power save function is not activated during playing back slideshow or recording movies, or when
connected to a computer.
[201] How to Use

PAL/NTSC Selector

Plays back movies recorded with the product on a PAL/NTSC system TV.
1. MENU → (Setup) → [PAL/NTSC Selector] → [Enter]
Note
This function is provided with 1080 50i-compatible devices only. It is not provided with 1080 60i-
compatible devices. The 1080 50i-compatible devices have a "50i" mark on the bottom of the product.
If you insert a memory card that has previously been formatted with the PAL system, a message
telling you that you must re-format the card appears. When you record using the NTSC system, re-
format the memory card or use another memory card.
When the NTSC mode is selected, the "Running on NTSC." message always appears on the start-up
screen each time you turn the product on.
[202] How to Use

Cleaning Mode

Allows you to clean the image sensor.
1. Confirm that the battery has been charged sufficiently.
2. MENU → (Setup) → [Cleaning Mode] → [Enter]
3. Turn off the product following the instructions on the screen.
Changing settings
Changing settings
Setup menu
Setup menu