GE LP 31 Operating Manual page 16

g
10 Manual Bypass Switch:
11 Input terminals:
12 Output terminals:
13 Bypass input terminals:
14 ComConnect Interface Port (RS232 - see chapter 5.1)
15 Interface PCB, with:
16 Alarm connector of the optional battery extension MCB.
17 Potential free contacts (see chapter 5.2), pin 1 = common, pin 2 = NC (not connected).
18 Emergency shutdown (EPO – Emergency Power Off).
19 Slot for optional SNMP plug-in card (behind PCB) (see chapter 5.3).
20 Slots to fasten cable clamps.
21 Battery extension connection terminals: 12, 14 (plus), 13, 15 (minus) e 16 (GND)
OPM_LPS_31E_8K0_20K_1GB_V010.doc
Figure 6 – Rear panel
1 = load on UPS
2 = load on bypass
7 (L1) / 8 (L2) / 9 (L3)
10 = neutral
11 = protective earth
1 (L) / 2 (N),
3 = protective earth
4 (L) / 5 (N)
6 = protective earth
16/40 Operating Manual LP 31 / 8-10-15-20 kVA
GE