Advertisement
let's get started
Step 1- hardware installation
1
Attach the supplied antenna to the port marked 3G Antenna.
[This should be attached in a clockwise direction.]
2
Insert your Smart Hub SIM card (until you hear a click) into the SIM slot.
Please note – SIM cards are assigned specific rate plans for the TELUS Smart Hub. Your Smart Hub SIM card will not
work in other TELUS devices.
3
For voice calls, connect a standard Analog telephone to the port labeled
Line 1 using the RJ-11 cable provided.
4
If required, to activate jacks in your home or office connect an RJ-11
cable from the port labeled Line 2 to any wall jack.
5
Connect the power adapter to the Power Socket on the back of the
Smart Hub.
6
Plug the power adapter into the wall socket.
7
Wait approximately 60 seconds for the Smart Hub to power up.
1
3G Antenna
2
SIM Card Slot
3
Line 1 Port
4
Line 2 Port
5
Power Socket
Advertisement
