Magic Remote Functions; Other Connections - LG 40LF6300 Owner's Manual

Other Connections

Connect your TV to external devices. For the best
picture and audio quality, connect the external
device and the TV with the HDMI cable. Depending
upon the model, a cable may not be provided.

Magic Remote Functions

Magic remote control battery
When the message
is low. Change the battery.
battery. To install batteries, open the battery cover,
replace batteries (1.5 V AA) matching
to the label inside the compartment, and close the
battery cover. Failure to match the correct polarities
of the battery may cause the battery to burst or leak,
resulting in fire, personal injury, or ambient pollution.
Be sure to point the remote control at the remote
control sensor on the TV. To remove the batteries,
perform the installation actions in reverse.
This remote uses infrared light. When in use, it
should be pointed in the direction of the TV's
remote sensor.
CAUTION
y Do not mix old and new batteries, as this may
y
damage the remote control.
A
(POWER) Turns the TV on or off.
(INPUT) Changes the input source.
* Pressing and holding the
displays all the lists of external inputs.
Number buttons Enters numbers.
(DASH) Inserts a dash between numbers such as
2-1 and 2-2.
Accesses the saved channel list.
Views the information of the current channels
and screen.
is displayed, replace the
and ends
A
(INPUT) button
B
Adjusts the volume level.
(MUTE) Mutes all sounds.
* By pressing and holding the
descriptions function will be enabled.
* (Secondary Audio Program) Feature can also be
enabled by pressing the
Scrolls through the saved channels.
(Home) Accesses the Home menu.
(BACK) Returns to the previous screen.
Clears all on-screen displays and returns to TV
viewing.
C
Wheel (OK) Press the center of the Wheel button to
select a menu. You can change channels by using the
Wheel button.
(up/down/left/right) Press the up, down,
left or right button to scroll the menu. If you press
buttons while the pointer is in use, the pointer
will disappear from the screen and Magic Remote will
operate like a general remote control. To display the
pointer on the screen again, shake Magic Remote to the
left and right.
(Q. Settings) Accesses the Quick Settings.
* Pressing and holding the
displays the Advanced menu.
(Screen remote) Displays the Screen Remote.
* Accesses the Universal Control Menu in some regions.
Used for viewing 3D video. (For 3D models)
(Voice recognition)
Network connection is required to use the voice
recognition function.
1. Press the voice recognition button.
2. Speak when the voice display window appears on the
TV screen.
* Use the Magic Remote no further than 10 cm (4 inches)
from your face.
* The voice recognition may fail when you speak too fast
or too slowly.
* The recognition rate may vary depending upon the
user' s characteristics (voice, pronunciation, intonation,
and speed) and the environment (noise and TV volume).
Activates or deactivates the subtitles.
Color buttons These access special functions in some
menus. ( Red, Green,
B
C
button, video
key.
(Q. Settings) button
Yellow, Blue)
11