ION Gateway Quick Start Manual

Ion Gateway
®
Cellular Gateway and Wireless Sensors
I B
nsIde the ox
You should find the following items in the box:
1. Wireless Sensors
2. Wireless Cellular Gateway with Antennas
3. Power Supply
4. Mounting Hardware

5. Quick Start Guide

6. Batteries
C G
ellular ateway
WARNING: DO NOT plug your Cellular
Gateway in until after you have created an
account on www.iongateway.net and added your
cellular gateway and wireless sensors to the account.
1. Create an Ion Gateway user account and
®
assign wireless gateway and sensors.
2. Plug the power supply into a power outlet then
connect to the gateway. Slide power to 'ON'
position.
3. Once all three lights turn green, your network is
ready to bring sensors online.
4. Set up notifications.
5. Install sensors.
Q s
uICk tart
QUICK START GUIDE
Dated: 02/03/2014
Document Name: Ion Gateway_QS
a & n
CCount
If this is your first time using the Ion
system site you will need to create a new account. If
you have already created an account you can skip
to the "Logging into the Online System" section.
The following instructions will guide you through the
account creation process.
1. In a web browser, navigate to www.iongateway.
net.
2. Click the "Get Started Here" button to create
an account.
3. Follow the on-screen instructions to enter your
account and contact information.
4. After entering your account and contact
information, you will be prompted to create your
first sensor network. Simply enter a name for tis
network.
5. Add the information from your Ion
gateway then click the "Assign Gateway" button
(case sensitive).
6. Add the information from your first Ion
wireless sensor then click the "Assign Sensor"
button (case sensitive).
Page 1 of 9
s
etwork etup
Gateway online
®
Gateway
®
Gateway
®
www.iongateway.net