2. Position unit near the power outlet. Avoid the use of extension cords. 3. Clean unit thoroughly before use. 4. If unit fails to operate properly when first installed call NEMCO customer service at 1-800-782-6761. STARTUP 1. Turn on/off switches to the on position and make sure rollers are turning.
OPERATION 1. During slow sales periods, turn rear rollers on low heat and fill rollers with product. Keep front rollers on medium and serve product from there. Shift product from the rear to the front and reload. 2. During busy periods, set rear control to medium and front control to high. Serve from the front rollers first.
Page 4
IF ROLLERS WON’T HEAT Check power source to be sure machine is plugged into the proper voltage outlet (120 or 220 volt) and the receptacle is working. If properly connected and still no heat call NEMCO customer service at 1-800-782-6761 IF PILOT LIGHTS DON’T WORK...