Using The Self-Timer To Avoid Camera Shake - Canon PowerShot SX400 IS User Manual

ç Contents

Using the Self-Timer to Avoid Camera Shake

This option delays shutter release until about two seconds after
you have pressed the shutter button. If the camera is unsteady
while you are pressing the shutter button, it will not affect your shot.
●
Once you start the self-timer, the
lamp will blink and the camera will
play a self-timer sound.
●
Two seconds before the shot, the
blinking and sound will speed up.
(The lamp will remain lit in case
the flash fires.)
●
To cancel shooting after you have
triggered the self-timer, press the
[ ] button.
●
To restore the original setting,
choose [ ] in step 1.
Still Images
●
Follow step 1 in "Using the Self-
Timer" ( = 66) and choose [ ].
●
Once the setting is complete, [ ]
is displayed.
●
Follow step 2 in "Using the Self-
Timer" ( = 66) to shoot.
67
Movies