7) Printing speed:
5.2 Auto Cutter Specifications
Item
Cutter type
Cutting time
Cutting interval
Paper type
Operation voltage
Max. static current
Cutter lifetime
5.3 Interfaces
USB is fixed on board; all others (Serial Interface(RS232), Parallel
Interface(IEEE1284), Ethernet Interface, WLAN) are daughter boards.
5.4 Electric Parameters of the Power Supply
Item
Supply voltage
Current consumption
Ripple & Noise
Power Connector
Caution:
Please use the power adapter that is supplied with the printer or an equivalent
type.
5.5 Environmental Conditions
1)
Operating temperature and humidity: 5~45℃,20 ~ 80% RH
BTP-R880NP Installation manual
Font B: 0.25 mm {0.01"} (2 dots)
Kanji: 0.125 mm {0.005"} (1 dot)
Programmable by command
230 mm/s (Max) {9.05"/s}
54.3 LPS maximum (4.23 mm/feed)
Parameter
Slide cutter (Guillotine type)
500ms
3s
Thickness: 0.06 – 0.1mm
24VDC
1.2A
1, 800,000 cuts
(with reference paper)
24VDC±5%
Mean: approximately 2.0A (12.5% duty ratio)
Peak: Approximately 10 A
< 240mVp-p
1 --- Positive (+24V)
2 --- GND
3 --- NC.
- 14 -
The time that one cut takes.
20 times/min. (Max.)
Thermal paper or paper with the
same thickness
24V DC
Full cut or Partial cut
Parameter
(No dew condensation)
Remarks