Figure 3-10: Secureeasysetup Complete - Linksys WMP54GS EU User Manual

Wireless-G PCI Adapter with SpeedBooster
3. Press the Cisco logo or SecureEasySetup button on the wireless router or access point. When it turns white
and begins to flash, click the Next button on the Setup Wizard screen. The logo or button will stop flashing on
the wireless router or access point when the Adapter has been successfully added to the network. Repeat
this procedure for any additional SecureEasySetup device.
NOTE: You can only add one SecureEasySetup device at a time.
4. When SecureEasySetup is complete, you may save your configuration to a text file by clicking the Save
button, or print the configuration by clicking the Print button. Click Connect to Network to connect to your
network.
To check the link information, search for available wireless networks, or make additional configuration
changes, refer to Chapter 4: Using the Wireless Network Monitor.
Chapter 3: Setting up and Connecting the PCI Adapter
Setting Up the Adapter
Congratulations! Setup is complete.

Figure 3-10: SecureEasySetup complete

10