5. Insert the plastic hinge,
or attach the hand strap.
(Refer to Chapter
3 - Attaching the hand
strap).
6. Charge the battery.
7. Press Power Button for
three seconds to turn on
OT-200.
• To turn off OT-200.
Press Power Button for
three seconds. At the
prompt, tap Power Off.
Open the power jack cover. Plug the AC adaptor power cord into an
electrical outlet, then connect the DC plug of the adaptor cable to the
OT-200. It takes approximately 6 hours to fully charge the battery for the
first time. Subsequent charges might take longer.
To avoid damaging OT-200 or the AC adaptor,
make sure all connectors are properly
connected.
CAUTION
11