Screen Size Adjustment - Sanyo PLC-WXU3ST Owner's Manual

Computer Input
Store
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with
▲▼
the Point buttons and press the SELECT button. A
confirmation box appears and then select [Yes].
Stored data can be called up by selecting "Image" in
the Image Level Selection on page 32.
Quit
Exit the Image Adjust Menu.

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image
size.
1 Press the MENU button to display the On-Screen
Menu. Press the Point
red framed pointer to the Screen Menu icon.
2 Press the Point
framed pointer to the function that you want to
select and then press the SELECT button.
Normal
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original
image size is larger than the screen size (1280 x 800 ),
this projector enters panning mode automatically. Pan
the image with Point
the arrows turns red. When reached to the correction
limit, the arrows disappears.
Full
Provide the full screen image.
34
◄►
buttons to move the
▲▼
buttons and move the red
▲▼◄►
buttons. When adjusted,
Store item
Press the SELECT button
at this item to store the
adjusted data.
Screen Menu
Move the red framed pointer
to the function and press the
SELECT button.

Note:
• T h i s S c r e e n M e n u e x c e p t f o r
"Normal" and "Custom", cannot be
operated when 720p(HDTV), 1035i
(HDTV), or 1080i (HDTV) is selected
in the PC System Menu (p.28).
• The projector cannot display any
resolution higher than 1600x1200.
If your computer's screen resolution
is higher than it, reset the resolution
to the lower before connecting to the
projector.
• The image data in other than WXGA
(1280x800) is modified to fit the
screen size in initial mode.
• True, Full , and Digital zoom +/–
cannot be selected when 480i, 575i,
480p, or 575p is selected in the PC
System Menu (p.28).
M o v e t h e r e d
framed pointer to
any of Image 1 to
4 where you want
t o s e t a n d t h e n
press the SELECT
button.
The
confirmation box
appears, then
select [Yes].
Screen Menu icon