Technical Data - Hilti AG 100?7S Operating Instructions Manual

Discs
Diamond grinding disc
Assignment of discs to the equipment used
Item Equipment
A Guard
B Front cover (in combin-
ation with A)
C DG‑EX 100/4 or
DG‑EX 115/4.5" hood
for surface grinding
D DC‑EX 100/4" or
DC‑EX 115/4.5"-C
compact hood
(in conjunction with A)
E Side handle
F Clamping nut
G Clamping flange

5 Technical data

Right of technical changes reserved.
When powered by a generator or transformer, the generator or transformer's power output must be at least twice the
rated input power shown on the rating plate of the power tool. The operating voltage of the transformer or generator
must always be within +5% and -15% of the rated voltage of the power tool.
AG 100‑7S/
Power tool
AG 115‑7S
Rated power input 100 V: 700 W
110 V: 700 W
Rated current input 6.4...7 A
Rated frequency 50...60 Hz
Rated speed 11,500/min
Power tool
Abrasive cutting discs / abrasive
grinding discs
Thread diameter
Thread length
Protection class as per EN / IEC
Weight in accordance with EPTA
procedure 01/2003
NOTE
The vibration values given in these instructions have been measured in accordance with a standardized test and may
be used to compare one electric tool with another. They may be used for a preliminary assessment of exposure.
The data given represents the main applications of the electric tool. However, if the electric tool is used for different
applications, with different accessories or is poorly maintained, the data may vary. This may significantly increase
exposure over the total working period. An accurate estimation of exposure should also take into account the times
when the tool is switched off, or when it is running but not actually being used for a job. This may significantly reduce
exposure over the total working period. Identify additional safety measures to protect the operator from the effects of
Application
Rough grinding
AC‑D AG-D
X X
-
X
- -
- -
X X
X X
X X
AG 100‑8S/
AG 115‑8S
220...240 V: 850 W
3.4 A
50...60 Hz
11,500/min
AG 100‑7S/D; AG 100‑8S/D
Max. 100 mm
M10
11 mm
Protection class II (double insu-
lated)
1.9 kg
Designation
DG‑CW
AF-D AN-D
X X
- -
- -
- -
X X
X X
X X
AG 100‑7D/
AG 115‑7D
100 V: 700 W
110 V: 700 W
6.4...7 A
50...60 Hz
11,500/min
AG 115‑7S/D; AG 115‑8S/D
Max. 115 mm
M14
15 mm
Protection class II (double insu-
lated)
2.0 kg
Material
mineral
DG‑CW DC‑D
-
X
- -
-
X
-
X
X X
X X
X X
AG 100‑8D/
AG 115‑8D
220...240 V: 850 W
3.4 A
50...60 Hz
11,500/min
19
en