Table of Contents
Advertisement
VWF Series Vented Gas Log Set
CHECKING BURNER FLAMES
Flame should be yellow and extend vertically (not curling
toward fireplace screen).
PILOT FLAME APPEARANCE
The pilot flame must always be present when appliance is
operating. It should just touch the top of the thermocouple/
thermoplate tip.
During manufacturing, fabricating, and shipping, various components of this appliance are treated
with certain oils, films, or bonding agents. These chemicals are not harmful, but may produce annoy-
ing smoke and smells as they burn off the first time the appliance is used. Operate the appliance
2 to 3 hours at the highest setting to burn off all the oils, films, etc. Never use this appliance with
glassed doors closed. This could cause the pilot to go out and severe sooting outside the fireplace.
Always operate this appliance with the fireplace screens in place.
48
Ember bed should have
a yellow/orange glow
Figure 111 -
Flame Appearance
LG909
VWF30 Flame appearance
Figure 112 -
Pilot Flame Appearance
LG910
SPK Pilot flame
FLAME APPEARANCE
LG909
Thermocouple/
Thermopile Tip
LG910
27D7300
Advertisement
Table of Contents
