Front Panel Facilities - Pioneer PL-88F Service Manual

2. FRONT PANEL FACILITIES
o poweR switch
Press this switch to turn the power on and off.
Depressed ( -
) position:
Power is switched ON.
R e l e a s e d ( r
) p o s i t i o n :
Power is switched OFF.
When the POWER switch is set to ON, the following swit-
ches are set automatically.
ARM ELEVATION switch - UP. MANUAL ARM SET/CUT
s w i t c h - + O F F , R E P E A T s w i t c h - + O F F , S P E E D s e l e c t o r
switch -+ 33
@ o e c r s YN c HR o sw i t ch / i n d ic a t o r
This switch is used when a tape deck has been connected to
this unit using the accessory cord.
Depressed ( -
) position:
For operations which are synchronized with the tape
deck.
R e l e a s e d ( I
) p o s i t i o n :
For operations which are not svnchronized with the
tape deck.
@ naaruuAl ARM SET/CUT switch
r Press this switch for manual play.
o Press this switch to stop manual play.
@ SPeeO selector switch
This is pressed so that the speed indicator lights in line with
the rated speed of the record which is to be played.
" ( 3 3 ) " l i g h t s :
For playing 33-1/3rpm records.
" ( 4 5 ) " l i g h t s :
For playing 45 rpm records.
@ SflP swatch
r When this switch is pressed during play, the play of the
current track is suspended and the stylus starts playing
the next track.
o When the switch is pressed during programmed play,
the play of the current track is suspended and the
stylus moves on to the next track programmed and
starts playing that track.
@ STOP switch/ARM LOCATE switch/
indicator ( )
)
o Press to stop auto play.
r Press when moving the tonearm toward the right (in the
direction of the outside of the record) during manual play.
o Press this switch to release the program function.
o