Table of Contents
Advertisement
Scan Dwell Time (
)
This Menu mode allows selection of the dwell time in Scanning that the radio stays
on the channel after the received signal has gone away. The value shown is in
seconds.
Light Dwell Time (
)
This menu mode allows selection of the time that the lights stay on after the last key
press. The value shown is in seconds.
Squelch Override (
)
This Menu mode option allows the user to select the squelch override mode.
Squelch Override Time (
)
This option allows the time the squelch override is open. It can be adjusted between
0 and 10seconds. Use the value of 0seconds to only open the squelch while the key
is depressed.
Calling Channel Select (
)
This Menu mode allows selection of the Calling channel. This is the channel that the
16 key uses to toggle between channels.
Last Used Channel enable (
)
This menu mode sets the radio to use the last used channel when it is turned on.
The Default is Off, in which case channel 16 is the default channel on turn on.
Reset (
)
The Menu mode will clear all user settings and return them to factory defaults.
LOCALE ()
This Menu mode allows the user to select between frequency channel sets as follows:
SR203 Radio – International () and USA/Canada ()
SR203A Radio – International () and Rheine ()
See Section 6.4 for details of the frequency channels available in each set.
Serial number (
)
This Menu Mode displays the radios serial number. The value cannot be changed by
the user.
SOFTWARE (
)
This Menu mode displays the current software version number. The value cannot be
changed by the user.
11
Y1-03-0253 Rev C
- Quick Links:
- Basic Operation
- Sr203 Overview
Hide quick links:
Advertisement
Table of Contents
