NEC M350X User Manual page 76

INSTALLATION
OPTIONS(1)
SETUP
OPTIONS(2)
WIRED LAN
WIRELESS LAN
USAGE TIME
SOURCE
WIRED LAN
INFO.
WIRELESS LAN
VERSION
OTHERS
CURRENT SIGNAL
ALL DATA
RESET
CLEAR LAMP HOURS
CLEAR FILTER HOURS
* The asterisk (*) indicates that the default setting varies depending on the signal.
Downloaded From projector-manual.com NEC Manuals
ORIENTATION
CONTROL PANEL LOCK
SECURITY
COMMUNICATION SPEED
CONTROL ID
CONTROL ID NUMBER
CONTROL ID
TEST PATTERN
AUTO ADJUST
FAN MODE
COMPUTER1
COMPUTER2
SIGNAL SELECT
VIDEO
S-VIDEO
WXGA MODE
DEINTERLACE
VIDEO LEVEL
HDMI SETTINGS
AUDIO SELECT
BEEP
STANDBY MODE
AUTO POWER ON(AC)
AUTO POWER ON(COMP1)
AUTO POWER OFF
DEFAULT SOURCE SELECT
WIRED LAN
SETTINGS
RECONNECT
PROFILE
RECONNECT
LAMP LIFE REMAINING
LAMP HOURS USED
FILTER HOURS USED
TOTAL CARBON SAVINGS
SOURCE NAME
SOURCE INDEX
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SIGNAL TYPE
VIDEO TYPE
SYNC TYPE
SYNC POLARITY
SCAN TYPE
IP ADDRESS
SUBNET MASK
GATEWAY
MAC ADDRESS
IP ADDRESS
SUBNET MASK
GATEWAY
MAC ADDRESS
SSID
NETWORK TYPE
WEP/WPA
CHANNEL
SIGNAL LEVEL
FIRMWARE
DATA
PROJECTOR NAME
MODEL NO.
SERIAL NUMBER
LAN UNIT TYPE
CONTROL ID (when [CONTROL ID]
is set)
DESKTOP DESKTOP FRONT, CEILING REAR, DESKTOP REAR,
FRONT CEILING FRONT
OFF OFF, ON
OFF OFF, ON
38400bps 4800bps, 9600bps, 19200bps, 38400bps
1 1–254
OFF OFF, ON
NORMAL OFF, NORMAL, FINE
AUTO AUTO, HIGH, HIGH ALTITUDE
RGB/
RGB/COMPONENT, RGB, COMPONENT
COMPONENT
RGB/
RGB/COMPONENT, RGB, COMPONENT
COMPONENT
AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60,
AUTO
SECAM
AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60,
AUTO
SECAM
M350X/M300X/
M260X/M230X:
OFF OFF, ON
M300W/M260W:
ON
ON OFF, ON
AUTO AUTO, NORMAL, ENHANCED
HDMI HDMI, COMPUTER2
ON OFF, ON
NORMAL NORMAL, POWER-SAVING
OFF OFF, ON
OFF OFF, ON
OFF OFF, 0:05, 0:10, 0:20, 0:30
LAST, AUTO, COMPUTER1, COMPUTER2, HDMI, VIDEO,
LAST
S-VIDEO, VIEWER, NETWORK, USB DISPLAY
ENABLE DISABLE, ENABLE
DHCP: ON DHCP, IPADDRESS, SUBNET MASK, GATEWAY,
AUTO DNS: ON AUTO DNS, DNS
EASY
DISABLE, EASY CONNECTION, PROFILE1, PROFILE2
CONNECTION
66
5. Using On-Screen Menu