Honda 2009 Pilot Owner's Manual page 474

Maintenance Minder
U.S.
Canada
If the indicated required service is
not done and the remaining engine
oil life becomes 0%, the multi-
information display will show a
''SERVICE PAST DUE'' message,
the total mileage after the remaining
oil life became 0%, and the
maintenance item code(s).
468
U.S.
Canada
To cancel the system message, press
and release the INFO ( / ) button
on the steering wheel. At this time,
the system message indicator will
be turned off. Then the display
not
will change to the engine oil life
display. You will see the negative
mileage blinking and a ''SERVICE''
message along with the maintenance
item code(s) on the multi-
information display.
The system message will appear
again by pressing the INFO ( / )
button after canceling it.
You will also see the system
message every time you turn the
ignition switch to the ON (II)
position until you have the indicated
maintenance performed by your
dealer.
Negative mileage means your
vehicle has passed the maintenance
required point.
Immediately have the service
performed, and make sure to reset
the display as described on page 469 .