Siemens S25 Service Manual page 11

10.You then remove the ringer from the lower RF-screen.
11.Remove the clip from the lower RF-screen.
Remove the operating module and the radio and control module
12.
simultaneously
Warning!
The two modules are connected by means of a flexible cable.
Be careful not to damage it during handling.
13.Then carefully remove the retaining clips of the plug-in connector on the operating module
and pull the connector cable out.
14.If necessary, also remove the retaining clip of the connector on
the radio and control module and pull the flexible cable out.
15.Now remove the keypad mat and the dust protection frame
from the upper housing section.
Service Manual S25 / S2588
Sm_S25_lvl2_v11.doc
from the upper
Page 11 of 35
Information and Communication Products
housing section.
V 1.0
Mobile Phones
ICP CD ST
R. Fleuren
06/99