Power On/Off; Turning On The Power - Hitachi CP-S210 User Manual

Power ON/OFF

Turning On The Power

WARNING • When the power is ON, a strong light is emitted. Do not look into the
lens or vents of the projector.
NOTE
• Turn the power on/off in right order. Please power on the projector before
the connected devices. Power off the projector after the connected devices.
Make sure that the power cord is
1
firmly and correctly connected to the
projector and outlet.
When the lens cap is attached, remove
2
the lens cap.
Set the power switch to [ | ] (ON).
3
The POWER indicator will light orange.
Press the STANDBY/ON button of the
4
projector or the
control.
The projector lamp will light up and the POWER
indicator will begin blinking green.
According to a setup, the projector lamp may light
up and the POWER indicator may begin blinking
green, without pressing this button.
When the power is completely on, the indicator will
stop blinking and light green.
Downloaded From projector-manual.com Hitachi Manuals
14
Power switch (ON position)
button of the remote
POWER indicator
TEMP
POWER
LAMP
STANDBY/ON INPUT
MENU
STANDBY/ON button
Power switch
(STANDBY/ON) button
VIDEO RGB SEARCH
ASPECT AUTO BLANK
MAGNIFY VOLUME
ON